A majority of homeowners never notice the presence of mold until the damage or health issues are already present. The presence of dry wood or wet wood mold is already present if the individual experiences itchy, swelling or discoloring skin. The problem can be noticeable on the hands, feet, and face as well. When symptoms become more intense, one should check for dry wood mold. This type of mold appears as dark-colored areas on the wall. The area can be a little rough to the touch and a little itchier. The presence of wet wood mold on the same area indicates an increased risk of infection and tissue damage. As long as the area is exposed to moisture, there is a chance of the mold developing. A dry wood mold can produce little or no damage if it isn’t allowed to grow. However, the presence of the mold can lead to health issues. As the moist matter around the mold accumulates, the spores of the mold can become airborne and cause health issues. The mold grows and grows, until the affected person or home owner experiences a health issue. The worst part is that the mold can cause the damages decades after the initial symptoms.
So now you understand the problems that can arise from the presence of dry wood or wet wood mold. Knowing the problem is crucial to eliminating the mold. Getting rid of the mold is yet another step in making sure that you and your loved ones are safe from the damages that can come from the presence of mold. Preventing the mold is the best solution. A major factor of mold prevention is checking your home often. The frequency of inspecting your home has a huge influence on the possibility of its being affected by the presence of mold. It is a good idea to perform a visual inspection of the kitchen, bathroom and the bedroom. For additional prevention, you should check the chimney, the plumbing and the roofing. You should also run a temperature of your home and seal it properly.
The other factor of mold prevention is to get rid of the breeding grounds of the mold. The moisture around the mold should be sealed to make sure that it can’t reproduce. For additional prevention, you should check the water leaks and the damp areas of your home. The dampness can be an area where mold spreads. And finally, to complete the mold prevention, you should get rid of the wood that is in contact with the walls of the home. There are many types of wood that are in contact with the walls of the home. The moisture in these wood can trigger the growth of dry wood or wet wood mold. These wood are the siding, the ceiling molding and the moldings around the door frame. Getting rid of these wood is a major factor of mold prevention.
In conclusion, you should take precautions to prevent the possible infestation of dry wood or wet wood mold with your home. So it is very important to make sure that the mold can’t have the chance to grow. The inspection is a crucial factor for this purpose. As a preventive measure, you should make sure that you are able to see the symptoms of the mold. There are many methods to eliminate the possibility of this infestation of mold. And lastly, you should make sure that you take steps to avoid the infestation of this mold.